The Phoenix-25 ESC can be used in aircraft and helicopter installations and is ideal for Astro 020, Astro 05, Aveox 2713, Mega 1615, Jeti Phasor (under 25 amps) and Hacker B-20 and B-40 motor applications. With it's feature-rich user settings, the Phoenix-25 can be set up for almost any installation using 25 amps or less. Three timing settings, over-current protection, helicopter governor mode, five cut-off voltages and more! It even fits comfortably in narrow sport fuselages.

• Battery Eliminator Circuit (BEC): eliminates receiver battery
• Safe "Power On"
• Low torque "Soft Start": protects gear boxes and belt drives from shock
• Simple setup: no complicated switches or wiring
• Tough surface mount construction
• Smooth reverse exponential throttle
• Audible Arming Signal
• Self-calibrating endpoints: maximizes usable stick travel
• Auto Motor cut-off with reset
• Auto shut-down when signal is lost
• Microprocessor Controlled

Cells w/BEC	5-10
Cells w/o BEC	5-16
Continuous	25 amps
Surge	40 amps
Switching Rate	11,000 Hz
Resistance	0.0065 Ohms
Brake	Yes
Low Voltage Cut-off	Programmable
Reversible	Yes - change any two wires
Size	1.08 x 0.91 x 0.16 in.
Weight (with wires)	0.6 oz. (17g)
Universal Connector