blinki-mc4 measures the receiver operating voltage under load (while the model is in flight), stores the value, and displays it constantly until the receiver is switched off. The novelty at blinki-mc4 is, that the display can be matched to the used type of battery and load. Very important for the safety of your helicopter or other aircraft using a receiver battery.
blinki-mc4 uses a piezo sounder to inform you (in two steps) when the receiver battery reaches a critical state while the model is flying. blinki-mc4 can be used as a model-finder, i.e. helps you locate a lost model. blinki-mc4 features an integral glitch counter which informs you of the number of occurrences of interferences (glitches) during the flight. It does it by counting the glitches (pulse variations) at the receiver output to which you have connected the unit.
NEW: The receiver signal is lead through to a 3 pin connector (if you have not enough output channels in your receiver to connect the blinki-mc4) NEW: Alarm output.

Weight: 10 g
Size: about 61 x 17 x 10 mm
3 red, 2 yellow, 5 green LEDs for 4...6 cells Ni-Cd and Ni-MH